2.8k
Connect
  • GitHub
  • Mastodon
  • Twitter
  • Slack
  • Linkedin

Blog

Flox 1.3: Simplified Service Management with Flox

Steve Swoyer | 22 August 2024
Flox 1.3: Simplified Service Management with Flox

Flox makes it easy to install and run virtually any kind of service in a dev environment.

Need a local nginx reverse proxy? Or a Redis caching layer to mimic the one in your production environment? How about a local PostgreSQL or Kafka instance? Just fire up a terminal and flox install them.

With the new service management capabilities shipping in Flox 1.3.0, this story gets even better!

Starting and stopping services is now a cinch, because Flox takes care of all the background setup and teardown tasks for you. So instead of authoring logic to watchdog your services, you can just define the ones you need Flox to manage in a software manifest.

But rather than telling you, let’s show you—by walking you through a couple of concrete examples.

You’ll not only learn how service management works, but also how it makes Flox’s simple, intuitive approach to creating and sharing reproducible dev environments that much simpler.

A turn-key local LLM

Flox’s Ollama example environment makes it easy to run Llama, Mixtral, and other powerful LLMs locally.

But our initial version of this environment shipped without service management, which was still being built into Flox at the time. So achieving this behavior required authoring chunks of monitoring and control logic for the environment’s separate [hook] and [profile] sections. Here’s an excerpt from [hook]:

if [ -f "$autostart" ] || [ "${choice:0:1}" = "A" ] || [ "${choice:0:1}" = "Y" ] ; then
      export OLLAMA_STARTED=1
      tmp_procfile=$(mktemp)
      echo "ollama: ollama serve" > "$tmp_procfile"
      "$FLOX_ENV/bin/overmind" start -f "$tmp_procfile" -s "$OLLAMA_SOCKFILE" -D &>/dev/null

Using service management, you can achieve the same result—an ollama serve that starts when you flox activate your environment and terminates when you exit—with just a fraction of the logic. To wit:

[services.ollama]
command = "ollama serve"

That’s it. That’s all you’ve gotta do. For existing users, the biggest change is primarily one of muscle memory: to start your service(s) at activation, you’ve got to use the flox activate -s command-line flag. (That’s short for --start-services.)

You can check the status of your service(s) by using the new flox services status command:

flox [ollama-redux] daedalus@ethos:~/dev/ollama-redux$ flox services status
NAME       STATUS            PID
ollama     Running        314080

With service management, ollama serve automatically shuts down when you exit your environment, but you can also stop it manually—or start it back up again—should you need to:

flox [ollama-redux] daedalus@ethos:~/dev/ollama-redux$ flox services stop ollama
✅ Service 'ollama' stopped
 
flox [ollama-redux] daedalus@ethos:~/dev/ollama-redux$ flox services start ollama
✅ Service 'ollama' started.

That is service management in a nutshell.

But while a turn-key, ephemeral Ollama service is cool, a similar option for PostgreSQL would be amazing. So let’s pivot to Flox’s service management-enabled PostgreSQL example environment!

An on-when-you-need-it, off-when-you-don’t PostgreSQL environment

Between them, Flox’s Graham Hudgins and Ross Turk created a kinda cool PostgreSQL example environment to showcase service management. For this use case, they didn’t even need to replace any “prior art” in the form of service setup/teardown scripting logic. And that’s a good thing! After all, authoring logic that (a) autostarts a PostgreSQL instance, (b) spins up a background (watchdog) task to monitor its operation and (c) reliably shut it down is slightly more complicated than authoring shell traps.

Using this environment is as easy as pulling it from FloxHub and dusting off one’s SQL knowledge:

flox pull flox/postgres
flox activate -s
✅ You are now using the environment 'postgres'.
To stop using this environment, type 'exit'
 
✅ finished createdb on pgdb
 
Use 'psql' to connect.
 
flox [postgres] daedalus@ethos:~/dev/floxenvs/postgres$ psql
psql (15.7)
Type "help" for help.
 
pgdb=# \dt
Did not find any relations.
pgdb=# CREATE TABLE foo (id SERIAL PRIMARY KEY, name VARCHAR(50)); CREATE TABLE bar (id SERIAL PRIMARY KEY, description TEXT);
CREATE TABLE
CREATE TABLE
pgdb-# \dt
       List of relations
 Schema | Name | Type  | Owner  
--------+------+-------+--------
 public | bar  | table | pguser
 public | foo  | table | pguser
(2 rows)

Beneath this surface sheen of simplicity, there’s a lot of scaffolding built into this service-enabled environment. Let’s take a look at its components.

First, there’s the obligatory install section:

[install]
postgresql_15.pkg-path = "postgresql_15"
gum.pkg-path = "gum"

Next, the requisite services entry:

[services.postgres]
command = "postgres"

We use the [vars] section in the environment’s manifest.toml to define a local user and database, and configure PostgreSQL so it listens on a local port.

Note: Instead of hardcoding PGUSER and PGPASS in your environment’s manifest.toml, you could instead opt to retrieve them from a secrets manager like 1Password at runtime. Flox activation hooks give you an easy way to securely inject PGUSER, PGPASS, and other secrets into the environment when they’re needed.

[vars]
 
# PostgreSQL database settings - port, username, password
PGPORT = "5432"
PGUSER = "pguser"
PGPASS = "pgpass"
PGDATABASE = "pgdb"

The [hook] section performs setup and configuration tasks that don’t involve starting and monitoring the PostgreSQL service, like specifying data directories and initializing a new database instance using initdb, if one doesn't already exist.

[hook]
 
on-activate = '''
 
  #
  # Get our environment set up
  #
 
  # If PGDIR is not set, $PWD will be used
  if [ -z "$PGDIR" ]; then
    PGDIR="$PWD"
  fi
 
  # These tell postgres where to store data and connection socket
  export PGDATA=$PGDIR/postgres_data
 
  #
  # First-time setup for PostgreSQL
  #
 
  if [ ! -d $PGDATA ]; then
    gum spin --spinner dot --title "Running initdb in $PGDATA" \
      -- initdb $PGDATA --username $PGUSER -A md5 \
      --pwfile=<(echo $PGPASS) --auth=trust
    echo "✅ completed initdb in $PGDATA"
  fi
'''

If you forget to flox activate -s then you can manually start your services within an activated environment:

daedalus@ethos:~/dev/postgres$ flox activate
✅ You are now using the environment 'postgres'.
To stop using this environment, type 'exit'
 
✅ completed initdb in /home/daedalus/dev/postgres/postgres_data
✅ completed configuration of /home/daedalus/dev/postgres/postgres_data/postgresql.conf
 
flox [postgres] daedalus@ethos:~/dev/postgres$ psql
psql: error: connection to server on socket "/tmp/.s.PGSQL.5432" failed: No such file or directory
        Is the server running locally and accepting connections on that socket?
 
flox [postgres] daedalus@ethos:~/dev/postgres$ flox services start
✅ Service 'postgres' started.

Even though I started postgresql manually, as soon as I quit my environment, it ceases to exist. Flox automatically cleans it up.

flox [postgres] daedalus@ethos:~/dev/postgres$ procs | grep postgres
 987820 daedalus        │ pts/3 0.0 0.0 00:00:00 │ /bin/bash --noprofile --rcfile /home/daedalus/dev/postgres/.flox/run/x86_64-linux.postgres/activate.d/bash
 987890 daedalus        │       0.0 0.0 00:00:00 │ /nix/store/fpqmpvabkld200j0f6crj1x9q3by8202-flox-watchdog-1.2.3/bin/flox-watchdog --pid 987820 --logs /home/daedalus/dev/postgres/.flox/cache/watchdog.987820.log --socket /run/user/1000/flox.f5072c7d.sock --hash f5072c7d --registry /home/daedalus/.local/share/flox/env-registry.json
 988553 daedalus        │       0.0 0.0 00:00:00 │ /nix/store/pwy5hbrbmkwip12g8blsl9f20s8n6rj6-process-compose-1.9.0/bin/process-compose up -f /home/daedalus/dev/postgres/.flox/run/x86_64-linux.postgres/service-config.yaml -u /run/user/1000/flox.f5072c7d.sock -L /tmp/tmp.TeSvnxTrTZ --tui=false
 988578 daedalus        │       0.0 0.0 00:00:00 │ postgres
 988603 daedalus        │       0.0 0.0 00:00:00 │ postgres: checkpointer
 988604 daedalus        │       0.0 0.0 00:00:00 │ postgres: background writer
 988611 daedalus        │       0.0 0.0 00:00:00 │ postgres: walwriter
 988612 daedalus        │       0.0 0.0 00:00:00 │ postgres: autovacuum launcher
 988613 daedalus        │       0.0 0.0 00:00:00 │ postgres: logical replication launcher
 990680 daedalus        │ pts/3 0.0 0.0 00:00:00 │ grep postgres
 
flox [postgres] 1 daedalus@ethos:~/dev/postgres$ exit
exit
 
1 daedalus@ethos:~/dev/postgres$ procs | grep postgres
 991305 daedalus        │ pts/3 0.0 0.0 00:00:00 │ grep postgres

You can use service management in Flox to build as many services as you need into your environments, without authoring logic to set them up or tear them down. Plus, Flox environments are easy to work with, especially in the local context, because you get direct access to your system’s settings and resources.

Think of this article as Service Managment (SM) 101. For SM 202, we’ll be showcasing a Floxified retrieval-augmented generation (RAG) stack. You won’t wanna miss that!

One giant leap for reproducible software development

Service management is a great demonstration of how rapidly Flox is maturing. Just six months ago, you couldn’t install as many different software packages and versions. You didn’t have a reproducible way to use software that wasn’t already in Flox Catalog in your projects. And you couldn’t easily share Flox environments with your team members.

Flox got a whole lot more powerful in just a few months!

How powerful will Flox be six months from now? Why wait to find out​? Flox is free to use and it’s great for everything from quick-and-dirty proofs-of-concept on your local system to reproducible runtimes in CI and production. Plus, you can get started in fewer than five minutes.

Download Flox today and put it to the test!