Build and publish packages

At some point during the development process you typically want to build your application so that it can be distributed or run. Flox aims to be the one tool that you need for the entire software development lifecycle, so let’s see how you can not only develop your software with Flox, but build it with Flox as well.

Prepare a project

Let’s start by creating a simple Go project. We’ll create a directory called myproject and create a Flox environment inside of it so we can install our tools.

$ mkdir myproject
$ cd myproject
$ flox init
⚡︎ Created environment 'myproject' (aarch64-darwin)

Next:
  $ flox search <package>    <- Search for a package
  $ flox install <package>   <- Install a package into an environment
  $ flox activate            <- Enter the environment
  $ flox edit                <- Add environment variables and shell hooks

Since we’re using Go, we’ll want to install Go:

$ flox install go
✔ 'go' installed to environment 'myproject'
$ # let's see what version of Go we have
$ flox list
go: go (1.24.1)

Now let’s add some very minimal code so that we have something to build. For now this will be a very simple “hello world” application. Start by activating the environment so that we have our Go application available.

$ flox activate
✔ You are now using the environment 'myproject'.
To stop using this environment, type 'exit'

flox [myproject] $ go mod init hello
go: creating new go.mod: module hello
flox [myproject] $ touch main.go

Now edit main.go to have the following contents:

package main

import "fmt"

func main() {
  fmt.Println("Hello World")
}

Now let’s ensure that we can build the hello program:

flox [myproject] $ go build
flox [myproject] $ # ensure that 'hello' was built
flox [myproject] $ ls -al
.rw-r--r--   24 zmitchell 27 Mar 14:31 go.mod
.rwxr-xr-x 2.4M zmitchell 27 Mar 14:32 hello
.rw-r--r--   77 zmitchell 27 Mar 14:32 main.go

We can build the program, so let’s verify that we can run it:

flox [myproject] $ # ensure that 'hello' runs
flox [myproject] $ ./hello
Hello World

Everything appears to be in working order, so now we can discuss what it looks like to build the program with Flox instead of running the build commands ourselves.

Define a build

In order to define a Flox build, we add an entry to the [build] section of the manifest. Every name added to the build section creates a new package. In our case the package will be the compiled Go program, but you can use Flox to build all kinds of things. See the builds page for more examples of what you can build with Flox. All that’s necessary to define a build is a short script that does two things:

Runs any commands necessary to build the program
Copies the program to a directory called $out

The $out shell variable holds the path to a temporary directory where your build package should be placed (again, “package” in our case means the compiled hello program). The $out directory adheres to the Filesystem Hierarchy Standard (FHS), which is just the formal name for the convention of placing executable files in /bin, libraries in /lib, etc. For this hello program we’ll want to place it in $out/bin since hello is an executable program, and that’s where the FHS says to put those types of files. Flox expects you to put executables there, and if you put them somewhere else you may experience unexpected behavior. Let’s now define our build. Run flox edit so that you can edit your manifest, and add the following section:

[build.hello]
description = "My custom program printing hello world in Go"
command = '''
  mkdir -p $out/bin
  go build # produces the ./hello executable file
  cp hello $out/bin/hello
'''

Perform a build

It’s the moment of truth, let’s run flox build to have Flox build our hello program for us:

flox [myproject] $ flox build
Rendering hello build script to /var/folders/qn/77rf0syj2s7djp588bzp5vkm0000gn/T//d6f2efa3-hello-build.bash
Building hello-0.0.0 in local mode
00:00:00.004571 + go build
00:00:00.205192 + mkdir -p /tmp/store_d6f2efa321a606aebf3b41d0d96ace1d-hello-0.0.0/bin
00:00:00.207584 + cp hello /tmp/store_d6f2efa321a606aebf3b41d0d96ace1d-hello-0.0.0/bin/hello
this derivation will be built:
  /nix/store/g3z03h4p2xa9rf6y78d0xamryggawvha-hello-0.0.0.drv
building '/nix/store/g3z03h4p2xa9rf6y78d0xamryggawvha-hello-0.0.0.drv'...
hello-0.0.0> patching script interpreter paths in /nix/store/2hc9mjxs6wqcd8cscw9ll650jv1k6wn1-hello-0.0.0/bin/hello
Completed build of hello-0.0.0 in local mode

⚡︎ Build completed successfully. Output created: ./result-hello

It worked! The last line of output tells us that the built output was created in our current directory and called result-hello. Every build output has the name result-<name> where <name> is the name you used in the [build] section of your manifest (for example [build.hello]). This result-hello file is actually a symbolic link to the final destination of the $out directory. That means we can’t run result-hello directly, and instead we need to run result-hello/bin/hello. Let’s do that now:

flox [myproject] $ ./result-hello/bin/hello
Hello World

Define a second build

It’s possible to define more than one build for your Flox environment. Why would you want to do that? In our case we have a Go program, and by default the Go compiler optimizes for fast builds, but not necessarily fast or small executables. This makes development nice because you get the fastest possible feedback cycle when developing your software, but in production you probably want a more optimized program. We can define one build for development, and another build for our “production” hello program, both using the same source code and tools! Run flox edit to edit your manifest again, and add this new build:

[build.hello-opt]
command = '''
  go build -ldflags="-s -w" -gcflags="-l=4"
  mkdir -p $out/bin
  cp hello $out/bin/hello
'''
description = "A program that greets you, very quickly"
version = "1.0.0"

This build produces a version of our hello program with some optimizations applied. Now if you run flox build it will run both the hello and hello-opt builds, or we could specify just the hello-opt build with flox build hello-opt:

flox [myproject] $ flox build hello-opt
Rendering hello-opt build script to /var/folders/qn/77rf0syj2s7djp588bzp5vkm0000gn/T//60dfcc45-hello-opt-build.bash
Building hello-opt-1.0.0 in local mode
00:00:00.004522 + go build '-ldflags=-s -w' -gcflags=-l=4
00:00:00.155021 + mkdir -p /tmp/store_60dfcc45203ccd97815dbc9aecc6d84d-hello-opt-1.0.0/bin
00:00:00.157435 + cp hello /tmp/store_60dfcc45203ccd97815dbc9aecc6d84d-hello-opt-1.0.0/bin/hello
this derivation will be built:
  /nix/store/k6za2nx7jla6rwzs7lj1qm4rc03v9z7q-hello-opt-1.0.0.drv
building '/nix/store/k6za2nx7jla6rwzs7lj1qm4rc03v9z7q-hello-opt-1.0.0.drv'...
hello-opt-1.0.0> signing /nix/store/nbykbq9fy0z67hhlf1kvf8wk7wb29x59-hello-opt-1.0.0
hello-opt-1.0.0> patching script interpreter paths in /nix/store/nbykbq9fy0z67hhlf1kvf8wk7wb29x59-hello-opt-1.0.0/bin/hello
Completed build of hello-opt-1.0.0 in local mode

⚡︎ Build completed successfully. Output created: ./result-hello-opt

Publish the package

This is a Flox for Teams featureThis is a paid feature included with Flox for Teams.

Now that the package is built, we can send it somewhere. Every user has a private catalog that they can publish packages to. In order to share packages with other people you must create an organization. This is a paid feature, and if you would like access to it you should contact Flox directly. See the organizations page for more details. Now that you’ve built the package you can publish it to your private catalog via the flox publish command. This command has a few requirements to make sure that the package you’re publishing can be built by other people reproducibly:

The Flox environment must be in a git repository.
All tracked files in the repository must be clean.
The repository must have a remote configured.
The current revision must be pushed to the remote.
The Flox environment must contain at least one package so that the published package can be attached to a point in time in the Base Catalog (where our go package came from).

Let’s say that we’ve done all of that so that we can publish our hello program:

flox [myproject] $ flox publish hello

The flox publish command performs a clean build of the package in a temporary directory to ensure that the build doesn’t depend on anything outside of the git repository.

Install the package

This is a Flox for Teams featureThis is a paid feature included with Flox for Teams.

Now that you’ve published the package, it will show up in flox search and flox show, and can be installed via flox install. The package will appear with your username or organization name prefixed to the package name. Let’s say your username is myuser and the package name is hello, in which case the published package will appear as myuser/hello in flox show, flox search, and flox install. Let’s see that in action with flox search:

flox [myproject] $ flox search hello
myuser/hello                My custom program printing hello world in Go
hello                       Program that produces a familiar, friendly greeting
hello-go                    Simple program printing hello world in Go
hello-cpp                   Basic sanity check that C++ and cmake infrastructure are working
nwg-hello                   GTK3-based greeter for the greetd daemon, written in python
hello-unfree                Example package with unfree license (for testing)
hello-wayland               Hello world Wayland client
sbclPackages.hello-clog     <no description provided>
texlivePackages.othello     Modification of a Go package to create othello boards
sbclPackages.hello-builder  <no description provided>

Showing 10 of 23 results. Use `flox search hello --all` to see the full list.

Use 'flox show <package>' to see available versions

You can see that our myuser/hello package is the first result. Now that we know it’s available, let’s install it:

flox [myproject] $ flox install myuser/hello
✔ 'myuser/hello' installed to environment 'myproject'

Conclusion

With Flox you have an integrated experience where the same tool you use to develop software is also used to build it, publish it, and eventually consume it. The story doesn’t end here though. In this guide we’ve shown you how to build and distribute programs, but you can also use it to distribute configuration files (or any other file). See the builds concept page for examples of what else you can build and publish with Flox.

Introduction

Install Flox

Quickstart

Tutorials

Imageless Kubernetes

Concepts

Languages

Customer

Build and publish packages

Prepare a project

Define a build

Perform a build

Define a second build

Publish the package

Install the package

Conclusion

​Prepare a project

​Define a build

​Perform a build

​Define a second build

​Publish the package

​Install the package

​Conclusion

Prepare a project

Define a build

Perform a build

Define a second build

Publish the package

Install the package

Conclusion